Energy efficient siding works as part of a wall system, and the real savings come from what sits behind the panels: the foam, the wrap and the way they cover the studs.
Point a thermal camera at a house on a cold night and the wall tells on itself. Bright stripes run up the siding every 16 inches or so. Those stripes are the studs, and they’re carrying heat straight from your living room to the yard.
This energy efficient siding guide reads that image layer by layer. You’ll see why studs leak, what a foam backer and house wrap each add, where siding fits next to attic insulation and air sealing, and how to check a product claim before you sign.

The studs are the weak spot. Siding with a foam backer, or rigid foam under the siding, covers them; a sealed house wrap stops drafts. Seal and insulate the attic too, and look for a certified, tested R-value on any product you’re quoted.
What’s In This Guide
Why the Studs Show Up Hot
Most Ohio walls are built the same way: wood studs with insulation packed into the spaces between them. The insulation does its job in those cavities. The studs don’t, because wood is a far weaker insulator than the batts beside it.
The DOE’s Building America Solution Center puts numbers on it. Wood framing makes up about 24% of a conventionally framed wall, and wood has about one-fourth the thermal resistance of most insulation materials. Every stud, plate and header becomes a path for heat to skip around the insulation. Building scientists call that thermal bridging.
That’s the problem energy efficient siding is meant to solve. Swapping one plain panel for another won’t change the picture. Putting a continuous layer of foam across the outside of the studs will, because it covers every bridge at once instead of filling the gaps between them.
What that means for you: even a wall with full cavity insulation has roughly a quarter of its surface bridged by wood. That’s why the most energy efficient siding is the kind that adds a layer over the framing, not just a new face on top.
Build an Energy Efficient Siding Wall, Layer by Layer
The view below is a wall seen from above, warm room on the left, cold yard on the right. The red bands are studs. Switch on each layer of an energy efficient siding system and watch the outside face cool down and the heat-loss bars drop.
House wrapSheds water that gets behind the siding. On its own it may not stop air.
Tape + flashingSealed seams, edges and openings let the wrap block drafts too.
Foam backerCovers the studs from outside, one panel at a time.
Rigid foamA thicker blanket over every bridge, usually added when the old siding comes off.
What a Foam Backer Adds to Energy Efficient Siding
Insulated vinyl is the most common form of energy efficient siding: regular vinyl with a contoured foam backer bonded to the back of every panel. That foam fills the hollow behind the profile and lies flat against the wall, so it runs across the studs instead of between them.
There’s a standard for it. ASTM D7793, the specification for insulated vinyl siding, requires a thermal value of R-2.0 or greater, along with tests for wind load, impact and appearance. The Vinyl Siding Institute certification program lets you check a product against that standard by its label.
R-2.0 is a floor, not a ceiling. Products vary, so ask for the tested R-value of the exact energy efficient siding line you’re quoted. Profile and style are a separate choice; our guide to the types of vinyl siding walks through clapboard, Dutch lap, shakes and board and batten.

Covers the Studs
The backer is continuous across the framing, which is the part of the wall that cavity insulation can’t reach.
Tested to a Standard
ASTM D7793 checks more than R-value. Certified panels also pass tests for wind load, impact resistance and how they hold up to weather.
Pairs With Rigid Foam
On a full re-side, insulated panels can go over foam sheathing and a sealed wrap, which builds a thicker continuous layer over the framing.
House Wrap, Air Sealing and Continuous Insulation
Foam slows heat that moves through materials. Air carries heat a different way, by slipping through gaps. Energy efficient siding needs both handled, and the layer that handles air sits right behind the panels.
House wrap is first a water-resistive barrier: a drainage plane that keeps any water behind the cladding away from the sheathing. According to the DOE’s Building Science Education Solution Center, it can also serve as a continuous air barrier, but only when it’s taped at the seams, sealed at every edge and integrated with the flashing around windows and doors.
Continuous insulation is the bigger step. The DOE Energy Saver guide notes that foam wall sheathing gives a continuous layer of insulation that reduces thermal bridging through wood studs, and it suggests adding insulation whenever you replace the siding. Rigid boards commonly come in 1- and 2-inch thicknesses and rate about R-3.2 to R-6.5 per inch, depending on the type.
| Layer | Main job | What to ask for |
|---|---|---|
| House wrap | Water drainage | Lapped shingle-style, integrated with window and door flashing |
| Taped seams | Air barrier | Manufacturer tape on every seam, edges sealed, openings cut and folded in |
| Foam backer | Covers the studs | ASTM D7793 certification and the tested R-value on the label |
| Rigid foam | Thicker continuous layer | Board type, thickness and rated R-value written into the quote |
What Energy Efficient Siding Can’t Do Alone
Walls are one surface of the house. Heat also rises into the attic and leaks through gaps around chimneys, wiring and recessed lights. A new wall can’t fix an attic that’s thin on insulation.
ENERGY STAR estimates that homeowners save an average of 15% on heating and cooling by sealing air leaks and adding insulation. DOE adds a sequence: seal the leaks first, then check the attic, and if it’s under about R-30, or roughly 10 to 13 inches, add more.
So where does energy efficient siding fit? DOE’s advice is that if the attic is done and the house still feels drafty or cold, the walls are next. If your siding is due for replacement anyway, that’s the moment to add the foam, because the wall is already open.

- Seal the air leaks. Attic bypasses, rim joists, and gaps around pipes and wires.
- Top up the attic. Measure the depth and compare it with DOE’s guidance.
- Fix the openings. Drafty windows and doors are part of the wall, too.
- Upgrade the walls at re-side time. Add energy efficient siding, foam and a sealed wrap while the old siding is off.
Windows are the other big hole in a wall. If yours are on the list, our guide to gas-filled windows explains the glass, and exterior home improvements in order shows how to pair siding and windows in one phase.
How to Check an Energy Efficient Siding Claim
Every brochure says its siding saves energy. The useful question is how, and by how much, for your wall. A good quote answers both in writing. Here are the claims worth questioning before you choose energy efficient siding.
- A savings percentage with no source. Ask what house, climate and wall it was measured on.
- “Insulated” with no R-value. Look for the tested number and ASTM D7793 on the label.
- R-value per inch quoted as the whole wall. The stud bays and the foam add up differently.
- House wrap left loose. Untaped seams and unflashed openings won’t act as an air barrier.

The Takeaway Worth Sharing
Energy efficient siding works by covering the studs and sealing the wrap behind it. Do the attic first, then make the wall count when it’s open.
Send this to the neighbor who just got a siding quote.
Ready to Warm Up the Walls? Let’s Look Together
Thrush & Son®: family-owned exterior pros since 1960.
If you’re in the Miami Valley and weighing energy efficient siding, read the Thrush & Son® guide to insulated siding, then book an estimate. We’ll walk the walls, the wrap and the trim with you.
➡️ Schedule in Dayton➡️ View All ServicesCall (937) 833-5136 · 115 Jefferson St, Brookville, OH 45309
- GAF President’s Club Contractor
- Best of Dayton 2024 Winner · 2025 and 2026 Finalist
- BBB Accredited A+
Further Reading
Official sources: ENERGY STAR, DOE Energy Saver, the DOE Building America Solution Center, the DOE Building Science Education Solution Center and ASTM D7793.
Energy Efficient Siding FAQ
What makes siding energy efficient?
A continuous layer of insulation over the studs, plus a sealed house wrap behind it. The panel face alone does little; the foam and the air barrier do the work.
What is the most energy efficient siding?
The most energy efficient siding is the system with the most continuous insulation over the framing, such as insulated vinyl over rigid foam sheathing, installed over a taped and flashed house wrap.
What R-value does insulated vinyl siding have?
ASTM D7793 requires insulated vinyl siding to reach R-2.0 or greater. Products vary, so ask for the tested R-value of the exact line in your quote.
Is house wrap an air barrier?
It can be. DOE says house wrap works as a continuous air barrier only when its seams are taped, its edges are sealed and it’s integrated with the flashing at openings.
Should I insulate the attic or replace the siding first?
Usually the attic. DOE advises sealing leaks and topping up the attic first. If the house still feels drafty, add wall insulation or energy efficient siding, ideally when the old siding is replaced.
Written by Corey Thrush, Vice President and third generation of Thrush & Son®.


Leave a Reply